AUTOCLAVE STEAM STERILIZER – FULLY AUTOMATIC – VERTICAL[STANDARD & GMP MODELS]

• Double body construction, single chamber for    steam and water, covered externally by
outer shell.
• Lid made of thick stainless steel, pressure upto    22 PSI factory set at 15 PSI.
• Complete unit with automatic air purging, Digital    Temperature control & Indication with 0.1c    Accuracy/ Resolution, with electronic Digital timer    range 0 to 99 min.
• Autoclaving time cycle automatically starts when    set pressure is achieved.
• Automatic steam release once autoclaving cycle    complete.
• Complete with pressure gauge, safety valve,    steam release valve, extra safety valve.
• Incorporated with an Automatic Pressure Control    Switch as an additional safety device.
• Low Water level cut-off : Low water level cut-off    assembly connected to heater which    automatically cuts off power to heater if water    level is not sufficient thus eliminating heater    burn outs.
• Foot lifting arrangement included for Capacity    125 Ltr. and above. Not included/required for     lower sizes.
•  Provided with S.S. L-304 grade perforated    basket.
• Unit works on 230 V Ac, 50 Hz.

 

STANDARD MODEL  :    HIPL-001 B

Inner body made of heavy gauge Stainless Steel LM-304 grade with argon welded joints, outer body made of S.S. LM-304 grade mirror finished.

GMP MODEL  :    HIPL-001 C

Inner body made of heavy gauge Stainless Steel LM-316 grade with argon-welded joints, outer body made of SS LM-304 grademirror finished

Provided with Validation Documents.

 

CHAMBER SIZE

VOLUME

RATING WATTS

IN INCHES 
IN CMS

12”Ø x  20” Ht.

30 Ø  x  50 Ht.

35 Ltrs.

2000

14”Ø  x  22” Ht.

35 Ø  x  55 Ht.

52 Ltrs.

3000

18”Ø x  24” Ht.

45 Ø  x  60 Ht.

95 Ltrs.

4000

18”Ø x  30” Ht.

45 Ø  x  75 Ht.

125 Ltrs.

4000

22”Ø x  30” Ht.

55 Ø  x  75 Ht.

175 Ltrs.

6000

22”Ø x  36” Ht.

55 Ø  x  90 Ht.

200 Ltrs.

6000

 

 OPTIONAL :

Digital Temperature Controller with 4 sensors with Printer Interface to Dot Matrix printer
(Without printer)

Portable Single Point Strip Chart Recorder with Retransmission output

Same as above but with PC Interface with software